User Manual

SLG−Z−...
Festo SLG−Z−... 0512a English
19
3 Conditions of use
Please note
Incorrect handling can lead to malfunctioning.
S Make sure that the requirements in this chapter are always observed.
The product will then function correctly and safely.
S Compare the maximum values in these operating instructions with your actual
application (e.g. pressures, impact forces, impact energy, torques, tempera
tures).
The product can only be
operated in accordance with the relevant safety guide
lines if the maximum loading limits are observed.
S Make sure there is a supply of correctly
prepared compressed air.
S Please observe the regulations applicable
to the place of use and comply with
national and local regulations.
S Remove the packing.
The packaging is intended for recycling
(except
for oiled paper which must be
disposed of).
S Take into account the prevailing ambient
conditions.
S Please operate the SLG−Z−... in a clean
environment.
If dirt is not removed, the lever may only
swivel with difficulty.
S Slowly pressurize the complete system.
To do this use start−up valve type HEL−... .
S Use the product in
its original state. Un
authorized modification is not permitted.
Fig.4
LF−... LR−...
Fig.5
[°C] [%] [mbar]
Fig.6