User Manual

SLG−Z−...

Festo SLG−Z−... 0512a English

Fitting pneumatic components

S Connect the pneumatic tubing 1.

Fitting electric components

Using proximity switches:

S Place the proximity switches in the groove

3 of the intermediate position module

(Fig.19).

S Fasten the proximity switches in the end

positions.

There must be a minimum distance L of

10 mm from ferromagnetic parts.

Fitting control components

Please note

The stop lever can destroy the shock absorber when it moves back.

S Make sure that the slide of the linear drive is outside the swivel range when

the stop lever moves in (e.g. by means of a control delay circuit).

The swivel−in speed of the stop lever exceeds the slide

speed of the slide unit

type SLG−... .

Fig.18

Fig.19

Fig.20

10mm