Instruction Manual

5. Commissioning
5−6
Festo P.BE−GDCP−SFC−LACI−PB−E N en 0812NH
5.1.3 Before switching on
When the SFC−LACI is switched on, the controller interface is
activated as standard [HMI = off].
Caution
Unexpected movements of the drive due to incorrect or
incomplete parametrising
· Make sure that there is no active ENABLE signal when
switching on the SFC−LACI on the controller interface.
· Parameterise the entire system completely before
activating the controller with ENABLE or [HMI = on].