Instruction Manual
5. Commissioning
5−30
Festo P.BE−GDCP−SFC−LACI−PB−E N en 0812NH
Insert SFC−LACI as slave
The Hardware Configuration" window graphically represents
the structure of the master system. When the GSD file has
been installed, the SFC−LACI can be selected in the hardware
catalogue. It can be found in the group [PROFIBUS−DP]
[Additional Field Devices] [Drives] [Festo], (see Fig.5/1).
In order to insert the SFC−LACI:
1. Pull
the station type Festo SFC−LACI" (DP−V0 and DP−V1)
or Festo SFC−LACI DP−V0" ( 3 ) from the Hardware
Catalogue onto the PROFIBUS line ( 1 ) of the DP master
system (drag & drop).
2. Enter the PROFIBUS address, which you have set using
the FCT or the control panel, into the Properties
PROFIBUS
interface" dialog and confirm the value with
OK.
3. If necessary, enter other settings in the dialogue window
Properties DP slave" (e.g. the response monitoring,
see section 5.5.5 or the startup parameterising, see
section 5.5.4) and confirm with OK.
The SFC−LACI symbol is displayed on the line of the DP
master system (
2 ).