Instruction Manual

Contents and general instructions
XIV
Festo P.BE−GDCP−SFC−LACI−PB−EN en 0812NH
SFC−LACI motor controller manual
This manual contains basic general information on operating,
mounting, installing and commissioning the positioning
systems with the motor controller SFC−LACI−...−PB. It also
contains information on the functions of the PROFIBUS
interface as well as information on commissioning with the
Festo Configuration Tool (FCT) software package.
Information on additional components can be found in the
operating instructions supplied with the product.
Type
Designation Contents
Brief overview +
descriptions on CD ROM
 Brief overview:
Important initial information and
documentation overview
CD:
Includes descriptions as listed below
Description Motor controller SFC−LACI
GDCP−SFC−LACI−PB−...
Installation, commissioning and
diagnosis of positioning systems with
the SFC−LACI with communication via
PROFIBUS
Help system for software Festo Configuration Tool
help (contained in FCT
software)
Functional descriptions for the Festo
Configuration Tool configuration
software
Further descriptions as per
control interface
Variants
GDCP−SFC−LACI−IO−...
GDCP−SFC−LACI−CO−...
GDCP−SFC−LACI−DN−...
Installation, commissioning and
diagnosis of electric drives with the
SFC−LACI with communication via a
different control interface
Description of the S7
module
S7 module:
GDCP−SFC−LACI−PB−S7−...
Using the S7 module for the SFC−LACI
with PROFIBUS interface
Operating instructions Drives
DFME−...−LAS
DNCE−...−LAS
Installing and commissioning the drive