Instruction Manual

B. Supplementary information
B−90
Festo P.BE−GDCP−SFC−LACI−PB−E N en 0812NH
Sample Input
PNU 1305   uint32 rw
Description Parameters for on−the−fly measurement (position sampling)
Value = 1: Sampling at IN1; value = 2: Sampling at IN2. See section 5.7.12
CI 6510h 16h uint32 rw
Limit Switch Polarity
PNU 1306   uint8 rw
Description Type of proximity switch used for position sampling.
0 = N/C contact 1 = N/O contact
CI 6510h 1Ch uint8 rw
Brake Delay Time Switch ON
PNU 1310   uint16 rw
Description Brake: Switch on delay, see section 5.7.11
CI 6510h 17h uint16 rw
Brake Delay Time Switch OFF
PNU 1311   uint16 rw
Description Brake: Switch−off delay, see section 5.7.11
CI 6510h 18h uint16 rw
Automatic Brake Time
PNU 1312   uint16 rw
Description Activation time of the automatic brake, see section 5.7.11
CI 6510h 19h uint16 rw