Instruction Manual

B. Supplementary information
B−109
Festo P.BE−GDCP−SFC−LACI−PB−EN en 0812NH
B.5.1 Additional CI objects
Some objects cannot be accessed via the field bus, rather
only via the CI interface. These objects are listed here.
Representation of additional CI objects
Password
CI 20FAh 01h ... 02h Array V−string rw/r
Description Managing the FCT password, entering the super password.
FCT password
(FCT password)
20FAh 01h V−string
(FCT password)
Password for the FCT software
Value: <........> (fixed 8 characters, ASCII, 7−bit)
Default:<00000000> (status upon delivery and after resetting)
Super password
(super password)
20FAh 02h V−string
(super password)
Entering the super password.
Resets all passwords (FCT password and HMI password, object
20FB). Contact Festo Service if you require the super password.
1 Name of the parameter
2 CI object number
3 Subindices of the parameter
4 Class of the element
5 Type of the element
6 Description of the parameter
7 If applicable: description of the
subindices
8 Read/write permission:
r= read only
w= write only
rw = read and write
Fig.B/4: Representation of additional CI objects
12345
6
7
8