Instruction Manual

2. Fitting
2−5
Festo P.BE−GDCP−SFC−LACI−PB−EN en 0812NH
2.3 Mounting the controller
You can mount the SFC−LACI in one of two ways:
1. Wall mounting on a flat surface
2. H−rail mounting
Note
Mount the SFC−LACI or hat rail so that there is sufficient
space for heat dissipation (above and below at least
40mm).
2.3.1 Wall mounting
You will need:
A mounting surface of approximately 250 x 320 mm
2 sets of central supports type MUP−8/12 (accessory
items), (the four brackets are clipped into the edge of the
housing, see Fig.2/2).
4 tapped holes for screw size M3 with matching screws.
120 mm
Fig.2/2: Wall mounting