Instruction Manual

3. Installation
3−19
Festo P.BE−GDCP−SFC−LACI−PB−EN en 0812NH
3.7.3 Connection with field bus plugs from Festo
Connection with field bus plugs from Festo
You can connect the SFC−LACI easily to the field bus with the
field bus plug from Festo (type FBS−SUB−9−GS−DP−B). You can
disconnect the plug from the SFC−LACI without breaking the
bus connection (T−Tap function).
· Observe the fitting instructions for the field bus plug.
Tighten the two fastening screws at first by hand and then
with max. 0.4 Nm.
Note
The clamp strap in the field bus plug from Festo is con
nected internally only capacitively with the metallic
housing of the Sub−D plug. This is to prevent equalising
currents flowing through the screening of the field bus
cable.