User Manual

5. Commissioning
5−28
Festo GDCP−SFC−LACI−DN−EN en 0812NH
5.4.2 Configuration of the DeviceNet master (I/O configuration")
Configuration with
EDS file
EDS files" are available for configuring the DeviceNet
master. These files are installed with the aid of the
configuration softwar
e of the DeviceNet master. The detailed
procedure can be found in the manuals for this software.
Obtainable from
The accompanying CD contains EDS files for the SFC
−LACI in
the DeviceNet" folder.
You will find the latest EDS files on the Festo website at:
www.festo.com/download/
EDS file
For the SFC−LACI you will
require one of the following EDS
files (in English):
SFC−LACI−DN_08−Revx_y.eds (= 8 bytes of I/O data) or
SFC−LACI−DN_16−Revx_y.eds (= 16 bytes of I/O data,
transm
itted in 3 telegrams).
Only one EDS file can be installed.
 Graphics file: SFC−LACI.ico
Manual configurationVendor Code26 (= 1Ah)
Product Type12 (= 0Ch)
Product Code 9011 (decimal)
The corresponding device information can also be found in
the EDS file under [Device].