User Manual

B. Parametrizing via field bus
B−4
Festo GDCP−SFC−LACI−DN−EN en 0812NH
B.1.2 Parameter overview (class, attribute, instance)
Explicit Messaging The following tables contain all defined parameters with
indication of the Class (CLS), Attribute (ATTR) and Instance
(INST) for access via Explicit
Messaging".
FPC For access via FPC (within the cyclic I/O data), the FHPP
parameter number (PNU with subindex) is used.
A detailed description of the param
eters can be found under
the specified FHPP parameter numbers PNU in the sections
B.4.4 to B.4.10.
Device Data
FHPP
Class 100 (0x64) CLS ATTR INST PNU SI
Manufacturer Hardware Version BCD 100 1 1 100 0
Manufacturer Firmware Version BCD 100 2 1 101 0
Version FHPP 100 3 1 102 0
Version FCT PlugIn PlugIn Min. BCD 100 4 1 104 1
PlugIn Opt. BCD 100 5 1 104 2
Controller Type 100 6 1 115 0
Controller Serial Number 100 8 1 114 1 ... 12
Manufacturer Device Name 100 9 1 120 1 ... 30
User Device Name 100 10 1 121 1 ... 25
Drive Manufacturer 100 11 1 122 1 ... 30
HTTP Drive Catalog Address 100 12 1 123 1 ... 30
Festo Order Number 100 13 1 124 1 ... 30
Device Control 100 14 1 125 0