User Manual

C. CI interface

C−3

Festo GDCP−SFC−LACI−DN−EN en 0812NH

C.1 The CI interface

C.1.1 Using the parameterising interface

The parameterising interface (RS232) can be used to access

the objects of the Command Interpreter" (CI) for the

SFC−LACI. The FCT accesses the CI obj

ects, too.

1 Parameterising interface (RS232)

Caution

Not using the parameterising interface as designated

causes injury to people and material damage

The parameterising interface (RS232) is

not electrically i

solated and

not real−time capable.

It is not intended for permanent connection to PC systems

or as a controller interface.

Controlling the SFC−LACI via RS

232 requires, among other

things, a risk assessment by the user, ambient conditions

free of interference and reliability of data transmission e.g.

via the control

program of the higher−order control system.

· Note that control of the SFC−LACI via the RS232 does not

comply with designated use.

· Use the connection only for parameterising, commis

sioning and diagnosis.