User Manual

3. Installation
3−14
Festo GDCP−SFC−LACI−DN−EN en 0812NH
3.5 Parameterising interface
Serial interface for parameterising, commissioning and
diagnosing.
Note
For connecting a PC to the SFC−LACI, use only the cable
specified in Tab.3/2.
· If necessary, remove the protective cap from the
parameterising interface.
· Connect the following terminals with the programming
cable:
the socket on the SFC−LACI
a serial interface COMx of the PC.
M8 socket
Description
1243
1 GND Ground
2 RXD RS232
1)
:
Receiving cable of PC,
transmitting cable of SFC−LACI
3 TXD RS232
1)
:
Transmitting cable of PC,
receiving cable of SFC−LACI
4  (reserved, do not use)
1)
The levels correspond to the RS232 standard.
Tab.3/7: Parameterising interface (RS232) of the SFC−LACI