Manual

B. Supplementary information
B−4
Festo P.BE−SFC−DC−PB−S7−EN en 0604NH
B.1.2 Overview of parameters
This overview shows all the parameters of motor controller
type SFC−DC−...−PB with firmware version 1.10.
The current and complete description of the parameters can
be found in the manual for the SFC−DC.
Name
FHPP
PNU Subind.
1)
Type Access
2)
Device data
Standard parameters
Manufacturer Hardware Version
(hardware version of manufacturer)
100  uint16 ro
Manufacturer Firmware Version
(firmware version of manufacturer)
101  uint16 ro
Version FHPP 102  uint16 ro
Controller Serial Number 114 0...11 char ro
Extended parameters
Manufacturer Device Name (device name of manufacturer) 120 0...23 char ro
User Device Name (device name of user) 121 0...23 char rw1
Drive Manufacturer (manufacturer name) 122 0...29 char ro
HTTP Drive Catalogue Address
(HTTP address of manufacturer)
123 0...29 char ro
Festo Order Number 124 0...29 char ro
Device Control 125  uint8 rw2
HMI Parameters (MMI parameters) 126 0...3 uint8 rw1
Data Memory Control 127 0...1 uint8 wo
1)
Subindices of the parameter for FHPP with access via parametrizing blocks (0...n−1)
2)
ro = read only; wo = write only; rw/rw1 = read and write at any time;
rw2 = read and write during commissioning