Manual

1. Overview
1−4
Festo P.BE−SFC−DC−PB−S7−E N en 0604NH
1.2 The blocks at a glance
With the blocks you can incorporate the functions of the
SFC−DC directly in your programs. Normally you would
require three blocks for the various functions.
The blocks have been purposely split into groups, so that you
can decide yourself which functions you require for your ap
plication. In this way, e.g. parametrizing functions
can be
implemented in a separate project.
The example project contains the following special blocks:
 SFC_DC_CTRL (example project: FB10)
 PRM_FPC (example project: FB20)
 PRM_DPV1_SFB (example project: FB21)
 PRM_DPV1_SFC (example project: F B22)
 PRM_DB−FILE (example project: FB23)
A complete overview of the contents of the example project
can be found in chapter 2.3.