Installation Guide

27
6
8
7
E
D
A
B
A
B
D
6,5 (¼”) 6,5 (¼”)
20 (¾”)
20 (¾”)
22 (⁄”)
22 (⁄”)
22 (⁄”) 22 (⁄”)
6,5 (¼”) 6,5 (¼”)
18 (¾”)
44,4 (1 ¾”)
18 (¾”)
C
13 (½”)
www.fhiaba.com · [e-mail] · Tel [phone] · Fax [phone]
Installation Guide
Once completed the previous steps, push the units in their À nal posi-
tion
6
.
If the units are to be installed inside a niche or within an enclosed
structure, it is necessary to design a ventilation shaft at the back of
the niche to assure proper ventilation at the back of the unit. A 5 mm
gap is sufÀ cient to prevent overheating. Always mount front panels on
door and drawer before pushing the unit into its À nal position inside the
niche or structure.
Check the levelling of the appliance, adjusting its feet and wheels
to correct it.
Secure the appliance to the adjacent cabinets by À xing to these the
side proÀ les previously mounted on the appliance
7
.
To make this operation easier keep the door and the drawer open.
Mount the covering frames onto the proÀ les, À rst insert them laterally
and then push À rmly until a “click” is heard
8
.
Appliance Appliance
Wall
or
furniture
Wall
or
furniture
A Connecting element
B Alluminium frame
D Connecting element
E Aluminium frame
Side and central proÀ les mounting
Series: All