Installation Guide

28
1
2
3
4
5
www.fhiaba.com · [e-mail] · Tel [phone] · Fax [phone]
Free-standing installation
two or more appliances
Required accessories to be ordered separately:
Central Connection Kit (KCC)
Freestanding Kit
Aluminium proÀ les can be used to close the spaces between the ap-
pliance and adjacent structures.
Operate as follows:
Position the appliances in front of the installation area, leaving
enough space to operate at their back.
Peel off the self adhesive protection and apply the insulated anti-
condensation panel to the side of one appliance
1
.
Move at the back of the appliances to mount the joining brackets:
À x one side of the top and lower brackets to one of the appliances
and subsequently to the other
2
.
Place the two units side by side and join them at the front attaching
the two proÀ les with the supplied screws
3
.
Attach the bracket on top of the units as per À gure
4
.
Finish off by mounting the central cover frame onto the central
profiles, by pushing it until a click is heard
5
.
Series: Integrated/Classic