Installation Guide
www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222) www.fhiaba.com · www.thevettagroup.com · Info Line 1-855-4-FHIABA (1-855-434-4222)
46
36 ’’ 30 ‘‘ 24 ‘‘ 18 ‘‘
A 860 (33 7/8”) 740 (29 1/8”) 560 (22”) 410 (16 1/8”)
B > 100 (4”)
C 10 (3/8”)
7. COMPLETING THE INSTALLATION
7.2 Ventilation
PANEL READY AND CLADDED MODELS
A forced air system assures ventilation through a
grille, secured to the unit with magnetic plates,
positioned in the lower front part of the unit [ 1 ].
If the kitchen cabinet includes a kickplate, it must be
placed in a way to ensure optimal airflow [ 2 ].
In case of placing a kickplate dierently from picture
[ 2 ], the kickplate must have vents / openings at
least of an area equal to 50% of the area delimited
by A and B dimensions in picture [ 3 ].
The condenser must to be cleaned on a regular
basis. In order to do that, the front grille has to be
accessible [ 4 ].
X-PRO SERIES:
Ventilation is accomplished by a forced air system
through a grille located in the upper part of the
appliance. This grille should never be covered
by panels or any other devices that could reduce
its efficiency. Please refer to page Technical
specifications sections for X-Pro models to
ensure correct air circulation.
A
B
C
C
100 (4”)
50mm (1 ⅞”)
min 100mm (3 ⅞”)
2
1
3
4