Operation Manual

STARTING AND DRIVING
STARTING THE ENGINE
The car is fitted with an electronic engine lock
device: if the engine fails to start, see the paragraph
“The Fiat CODE system” in the section “Getting
to know your car”.
The engine may be noisier during the first few
seconds of operation, especially after a long period
of inactivity. This characteristic feature of the
hydraulic tappet system does not compromise
functionality or reliability: the system chosen for
your car was designed to limit maintenance
interventions.
We recommend that during the initial
period you do not demand full
performance from the car (e.g. excessive
acceleration, long journeys at top speed, sharp
braking etc.).
When the engine is switched off never
leave the key turned to MAR-ON to
prevent useless current absorption from
draining the battery.
WARNING
It is dangerous to have the engine
running indoors.The engine consumes
oxygen and engine exhaust contains carbon
dioxide, carbon monoxide and other toxic
gasses.
WARNING
Remember that the brake servo and
power steering are not operational until
the engine has been started, therefore much
more effort than usual is required on the brake
pedal and steering wheel.
STARTING PROCEDURE FOR PETROL
VERSIONS
Proceed as follows:
❒ operate the handbrake;
❒ put the gear lever into neutral;
❒ press the clutch pedal down to the floor without
touching the accelerator;
❒ turn the ignition key to AVV and release it as soon
as the engine starts.
103
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX