Operation Manual

❒ for cars fitted with alloy wheels, remove the
press-fitted hub cap using the screwdriver
provided;
❒ loosen the retaining bolts for the wheel to be
changed by about one turn using the spanner
provided E fig. 98;
❒ turn the jack handle to partially open it fig. 100;
❒ if the vehicle is equipped with side skirts, to let the
jack pass under the vehicle, the latter must be
tilted (as shown in fig. 99);
❒ position the jack near the wheel to be repaired at
the reference point on the side member;
❒ extend the jack until groove F fig. 100 on the jack
fits correctly into ridge G fig. 100 underneath the
side member;
❒ alert other passengers that the car is about to be
raised; all persons should be kept away from the
car until it has been lowered;
C
B
D
fig. 97
F0S0127
fig. 98
F0S0128
fig. 99
F0S0328
132
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX