Operation Manual

After tyre replacement
❒ arrange the space-saver wheel D fig. 97 in the
specific compartment in the boot;
❒ insert the partially open jack into the container C
and force it slightly into its housing so that it does
not vibrate when the car is moving;
❒ put the tools back into their places in the
container;
❒ stow the container complete with tools on the
spare wheel and secure everything with the
clamping device B;
❒ correctly reposition the boot stiff cover.
IMPORTANT Do not use air chambers with Tubeless
tyres. Check the inflation pressure of the tyres and
the space-saver wheel regularly.
IMPORTANT You will need to change the set of
bolts if you want to change the type of wheels fitted
(alloy rims instead of steel rims, and vice versa).
The whole set of fastening bolts must be replaced by
another set of suitably sized bolts and use a special
space-saver wheel with different build characteristics.
You should keep the bolts and space-saver wheel in
case you decide to use the original type of wheel
later on.
135
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX