Operation Manual

Fix&Go QUICK TYRE REPAIR KIT
(for versions/markets, where provided)
The Fix&Go fig. 103 quick tyre repair kit is located in
the boot and composed of:
❒ a spray bottle A with the sealant, equipped with
filling pipe B, separated by the compressor C;
❒ compressor C with pressure gauge, fitting valve to
couple the bottle A, cable with supply socket D
and pipe N to restore pressure (this is inside
the body as shown);
❒ adhesive label under the spray bottle A, with the
message “max. 80 km/h” to be placed where the
driver can easily see it (for example on the
dashboard) after repairing the tyre;
❒ instruction booklet fig. 104, for the quick and
correct use of the Fix&Go;
❒ a pair of protective gloves.
WARNING
Give the booklet to the technicians who
will be handling the tyre that was
treated using the Fix&Go kit.
In the event of a puncture caused by
foreign bodies, the kit may be used to
repair tyres showing damages on the
track or shoulder up to max. 4 mm diameter.
WARNING
Punctures on the sides of the tyre may
not be repaired. Do not use the Fix&Go
kit if the tyre was damaged as a result of being
used when underinflated.
fig. 103
F0S1016
fig. 104
F0S1017
136
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX