Operation Manual

WARNING
You must always indicate that the tyre
was repaired using the Fix&Go kit. Give
the booklet to the technicians who will be
handling the tyre that was treated using the
Fix&Go kit.
FOR CHECKING AND RESTORING
PRESSURE ONLY
The compressor may also be used for checking and
possibly restoring tyre pressure.
Proceed as follows:
❒ If the spray bottle A fig. 108 is connected to the
compressor, you need to press the release button
L to remove it;
❒ connect the pipe to the tyre valve;
❒ check the pressure on the pressure gauge;
❒ if the value of the pressure is too low, fit the
electric plug in the cigar-lighter socket and switch
on the compressor.
IMPORTANT To adjust the possible overpressure of
the tyre, press the air release button M.
fig. 108
F0S1022
140
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX