Operation Manual

Side
The intervention must be carried out
taking all precautions necessary to avoid
damaging the bodywork (use a sufficiently
rigid and appropriately thick plastic card).
To change the bulb, proceed as follows:
❒ lever the lens off, by initially applying force from
the front towards the back (1 - fig. 112);
❒ then lever in the opposite direction, by applying
force from the back part (2 - fig. 112) and remove
unit B;
❒ turn the bulb holder anticlockwise, extract the
clipped bulb and replace;
❒ refit the bulb holder in the lens, then position unit
B, ensuring that the fastening clip clicks into place.
fig. 111
F0S0052
fig. 112
F0S0355
145
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX