Operation Manual

DIPPED BEAM HEADLIGHTS
To change the bulb, proceed as follows:
remove the protective rubber cap mentioned
above;
press the fastener A fig. 113 and remove the bulb
holder;
remove the pressure-fitted bulb and replace it;
refit the cap locking it correctly;
refit the rubber cap.
With gas discharge bulbs (Xenon)
(for versions/markets where provided)
WARNING
Due to the high power supply voltage,
gas discharge bulbs (Xenon) should only
be replaced by specialised personnel: danger of
death! Go to a Fiat Dealership.
MAIN BEAM HEADLIGHTS
To change the bulb, proceed as follows:
remove the protective rubber cap mentioned
above;
release the two bulb holding clips A fig. 114;
extract the bulb and replace it;
fig. 113
F0S0053
fig. 114
F0S0054
146
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX