Operation Manual

❒ fit the new bulb, making the outline of the metallic
part coincide with the grooves on the reflector,
then reattach the bulb holding clips;
❒ refit the rubber cap.
SIDE LIGHTS/DAYTIME RUNNING LIGHTS
To change the bulb, proceed as follows:
❒ remove the protective rubber cap mentioned
above;
❒ turn the bulb holder B fig. 114 anticlockwise and
remove it;
❒ remove the pressure-fitted bulb and replace it;
❒ refit the bulb holder B by turning it clockwise and
locking it correctly;
❒ refit the rubber cap.
FOG LIGHTS (Fiat 500S versions)
IMPORTANT For all other versions of Fiat 500, to
replace the fog lights you must contact a Fiat
Dealership.
To replace the bulb, proceed as follows:
❒ steer the wheel completely inwards;
❒ adjust the tab A fig. 115 and remove the
pressure-fit flap;
❒ adjust the clip B fig. 116 and disconnect the
electrical connector C;
❒ rotate bulb holder D anticlockwise and remove
the unit;
❒ release the bulb and replace it;
❒ refit the unit, rotating clockwise to lock it and
reconnect the electrical connector;
❒ refit the flap and check that it is correctly locked.
fig. 115
F0S0380
fig. 116
F0S0381
147
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX