Operation Manual

❒ disconnect the electrical connector B fig. 120;
❒ press the retaining device C fig. 120 and open the
bulb holder;
❒ remove the pressure-fitted bulb to be replaced and
replace it;
❒ close the bulb holder making sure the catch is
correctly locked;
❒ tighten the two fastening screws and reinstall the
guard caps.
NUMBER PLATE LIGHTS
To replace the bulbs proceed as follows:
❒ operate in the point shown by the arrow fig. 121
and remove the lens A;
❒ change the bulb releasing it from the side contacts
and making sure the new bulb is correctly fastened
between the contacts;
❒ refit the lens.
fig. 120
F0S0059
fig. 121
F0S0139
149
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN
EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX