Operation Manual

For versions/markets, where provided, during the
daytime, and with the dipped headlamps on, the
instrument panel, buttons and sound system and
automatic climate control displays are set to
maximum brightness.
To adjust the light intensity, proceed as follows:
❒ press the MENU button
briefly to make the
display flash the previously stored level;
❒ press button + or – to adjust the brightness level;
❒ press the MENU button
briefly to return to
the menu screen or hold the button down to
return to the standard screen without storing.
Speed Beep (Speed limit)
This function is used to set the car speed limit (km/h
or mph); the driver is immediately alerted when
this limit is exceeded (see section “Warning lights
and messages”).
To set the desired speed limit, proceed as follows:
❒ briefly press the MENU button
: the display
will show the words (Speed Beep);
❒ press button + or – to select speed limit activation
(On) or deactivation (Off);
❒ if the function is on, press + or – to select the
required speed limit and then press MENU
to
confirm.
Note Setting is possible between 30 and 200 km/h,
or 20 and 125 mph, according to the previously
set unit. See the "Measurement unit adjustment
(Measurement unit)" paragraph described below. The
setting will increase/decrease by five units each time
button +/- is pressed. Hold down the button +/-
to increase/decrease the setting rapidly. Complete
the setting by briefly pressing the button when
you approach the required value.
❒ press the MENU button
briefly to return to
the menu screen or hold the button down to
return to the standard screen without storing.
To cancel the setting, proceed as follows:
❒ press the MENU button
briefly to make the
display flash (On);
❒ press button – : (Off) will flash on the display;
❒ press the MENU button
briefly to return to
the menu screen or hold the button down to
return to the standard screen without storing.
Trip B data (Activating Trip B)
With this function is possible to turn the Trip B
display (trip meter) on and off.
For further information see “Trip computer”.
Proceed as follows to switch the function on and off:
❒ press the MENU button
briefly, the display
will flash On or Off depending on the previous
setting;
14
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX