Operation Manual

❒ press button + or – to set;
❒ press the MENU button
briefly to return to
the menu screen or hold the button down to
return to the standard screen without storing.
Time adjustment (Clock adjustment)
This function enables to set the clock through two
sub-menus: “Time” and “Format”.
To carry out the adjustment, proceed as follows:
❒ briefly press the MENU button
: the display
will show the two submenus “Time” and “Mode”;
❒ press the button + or – to switch between the
two submenus;
❒ once you have selected a submenu, press the
MENU button
briefly;
❒ when you select the “Time” submenu, pressing the
MENU button
briefly makes the "hours" flash
on the display;
❒ press + or – to set the value;
❒ briefly press the MENU button
: “minutes” will
flash on the display;
❒ press + or – to set the value.
Note The setting will increase or decrease by one
unit each time the button + or – is pressed. Hold
down the button to increase/decrease the setting
rapidly and automatically. Complete the setting
by briefly pressing the button when you approach the
required value.
❒ when you select “Mode”, pressing the MENU
button
makes the mode flash on the display;
❒ press button + or – to select “24h” or “12h mode.
When you have made the adjustment, press the
MENU button
briefly to return to the
submenu screen or hold the button down to
return to the main menu screen without storing.
❒ hold the MENU button
down again to return
to the standard screen or to the main menu
according to where you are in the menu.
Set date (Setting the date)
Using this function it is possible to update the date
(day - month - year).
Proceed as follows to update:
❒ briefly press the MENU button
: “year” will
flash on the display;
❒ press + or – to set the value;
❒ briefly press the MENU button
: "month" will
flash on the display;
❒ press + or – to set the value;
❒ briefly press the MENU button
: “day” will
flash on the display;
15
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
❒ press + or – to set the value;