Operation Manual

❒ press the button + or – to switch between the
two submenus;
❒ once you have selected a submenu, press the
MENU button
briefly;
❒ when you select “Distances”, briefly pressing the
MENU button
makes the display show "km"
or "mi" depending on the previous setting;
❒ press button + or – to set;
❒ when you select “Consumption”, briefly pressing
the MENU button
makes km/l, l/100km or
mpg appear on the display depending on the
previous setting;
If the set distance unit is "km", the fuel consumption
unit will be displayed in km/l or l/100 km.
If the set distance unit is “mi” the fuel consumption
unit will be displayed in “mpg”.
❒ press the button + or – to select.
When you have made the adjustment, press the
MENU button
briefly to return to the submenu
screen or hold the button down to return to the
main menu screen without storing.
❒ hold the MENU button
down again to return
to the standard screen or to the main menu
according to where you are in the menu.
Language (Language selection)
Display messages can be shown in different
languages: Italian, English, German, Portuguese,
Spanish, French, Dutch and Polish.
To set the desired language, proceed as follows:
❒ briefly press the MENU button
: the previously
set “language” will flash on the display;
❒ press button + or – to set;
❒ press the MENU button
briefly to return to
the menu screen or hold the button down to
return to the standard screen without storing.
Warnings volume (Adjusting the alert/warning
acoustic signal volume)
With this function the volume of the buzzer which
accompanies the display of any failure/warning can be
adjusted according to 8 levels.
To set the desired volume, proceed as follows:
❒ briefly press the MENU button
: the previously
set volume level will flash on the display;
❒ press + or – to set the value;
❒ press the MENU button
briefly to return to
the menu screen or hold the button down to
return to the standard screen without storing.
Button volume (Adjusting the button volume)
This function may be used to adjust (to 8 levels)
the volume of the noise made when the MENU
button
,+ and – . buttons are pressed.
To set the desired volume, proceed as follows:
❒ briefly press the MENU button
: the previously
set volume level will flash on the display;
17
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX