Operation Manual

GHIbuttonsfig.29 - Manual selection
of air distribution
By pressing the buttons, one of the five possible air
flow distribution patterns can be selected:
air flow to the windscreen and front side window
vents to demist or defrost them.
air flow to central and side dashboard vents to
ventilate the chest and the face during the hot
season.
air flow towards the front seat feet area. Due to
the natural tendency of heat to spread upwards,
this type of distribution warms the passenger
compartment up as quickly as possible, providing
an immediate feeling of warmth.
+
distribution between feet area vents
(warmest air) and dashboard vents (coolest
air).
+
distribution between feet area vents and
windscreen/front side window vents. This
type of distribution achieves effective
heating of the passenger compartment and
prevents the windows from misting up.
The set air distribution is shown by the LEDs on the
selected buttons.
To restore the automatic air distribution control,
press the AUTO button.
L button f ig. 29
- Front window fast
demisting/defrosting
When the button
is pressed the system activates
all the functions required for fast demisting/
defrosting:
❒ compressor on (if the weather conditions are
suitable);
❒ air recirculation off;
❒ maximum air temperature setting (HI);
❒ fan speed determined according to the coolant
temperature;
❒ air flow conveyed to the windscreen and front side
windows;
❒ heated rear window on.
IMPORTANT This function stays on for about 3
minutes, from when engine coolant temperature
exceeds 50°C (petrol versions) or 35°C (Diesel
versions).
SYSTEM SERVICING
In winter, the climate control system must be turned
on at least once a month for about 10 minutes.
Before summer, have the system checked at a Fiat
Dealership.
35
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX