Operation Manual

WARNING
Daytime running lights cannot replace
dipped beam headlights when driving at
night or through tunnels.The use of daytime
running lights is governed by the highway code
of the country in which you are driving. Comply
with legal requirements.
DIPPED BEAM HEADLIGHTS/SIDE LIGHTS
With the ignition key turned to MAR-ON, turn the
twist switch to
fig. 30. If dipped beam headlights
are activated, the daytime running lights go out
and the side and tail lights and dipped beam
headlights come on. The
warning light will come
on in the instrument panel.
When the ignition key is turned to STOP or
removed and the twist switch is turned from O to
, all the side lights and number plate lights come
on. The
warning light will come on in the
instrument panel.
MAIN BEAM HEADLIGHTS
To switch on the main beam headlights, with twist
switch in position
fig. 30, push the stalk forward
toward the dashboard (stable position). The
warning light will come on in the instrument
panel.
They switch off when the stalk is pulled towards the
wheel (dipped beam headlights come back on).
FLASHING
You can flash the headlights by pulling the stalk
towards the wheel (unstable position) fig. 30. The
warning light will come on in the instrument
panel.
DIRECTION INDICATORS
Place the lever in the (stable) position:
up (position 1 fig. 31): activate the right hand
indicator;
down (position 2): activates the left direction
indicator.
Warning light
or should flash in the instrument
panel. The indicators switch off automatically when
the steering wheel is straightened.
fig. 30
F0S0210
37
GETTING TO
KNOW YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX