Operation Manual

UNIVERSAL ISOFIX CHILD
RESTRAINT SYSTEM ASSEMBLY
SETUP
The car is equipped with ISOFIX anchorages, a new
European standard which makes fitting a child
restraint system quick, simple and safe.
Traditional child restraint systems can be fitted
alongside Universal Isofix child restraint systems. An
example of Universal Isofix child restraint system
covering weight group 1 is shown in fig. 84. Specific
Isofix child restraint systems cover the other weight
groups. These seats must be used only if specifically
designed, tested and type-approved specifically for
this car (see the list of cars attached to the child
restraint system).
Due to its different fixing system, the child restraint
system must be anchored to the dedicated lower
metal rings A fig. 85, located between rear seat
backrest and cushion.
After removing the parcel shelf, secure the upper
belt (provided with the child's seat) to specific ring B
fig. 86 located between the rear backrest and the
boot floor.
fig. 84
F0S0132
fig. 85
F0S0133
92
GETTING TO KNOW
YOUR CAR
SAFETY
STARTING AND
DRIVING
WARNING LIGHTS
AND MESSAGES
IN AN EMERGENCY
SERVICING AND
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX