Operation Manual

SAFETY
102
To install an ISOFIX child restraint
system, attach it to the two metal
anchor points
A fig. 68 located where the rear seat
cushion meets the backrest, then
remove the parcel shelf and fix the
upper strap (available together with the
restraint system) to the anchor point
B fig. 69 located at the bottom behind
the backrest.
68
DVDF0S050c
69
DVDF0S051c
70
DVDF0S049c
An example of an Universal Isofix child
seat for weight group 1 is shown in
fig. 70.
The other weight groups are covered
by the specific Isofix child restraint
system, which can be used only if
specifically designed, tested and
approved for this car (see car list
provided with the child seat).
WARNING The figure is indicative and
for assembly purposes only.
Fit the child restraint system
according to the instructions, which
must be included.
NOTE When a Universal ISOFIX child
restraint system is used, only ECE
R44 “ISOFIX Universal” (R44/03 or
further upgrades) type-approved child
restraint systems can be used.
The Universal Isofix “Duo Plus” child
restraint system and the special “G
0/1” restraint system are available from
Lineaccessori Mopar
®
.
For any further details on
installation/use, refer to the
instruction manual provided with the
child seat.