Operation Manual

119
“Fix&Go” KIT
The kit is located in the luggage
compartment under the load platform
cover.
There is one or two of the following
kits, depending on the vehicle version:
❒ “Fix&Go Airflat” kit
❒ “Fix&Go Automatic” kit
“FIX&GO AIRFLAT” KIT
The kit is composed of:
❒ a spray bottle 1 fig. 90 with the
sealant, equipped with filling pipe 2,
separated by the compressor 3;
❒ compressor 3 complete with
pressure gauge, valve connector for
connecting the spray bottle 1, wire
with power socket 4 and pressure
restoring tube 5 (the latter on the
body in the point shown);
❒ sticker C, placed on the cylinder 1,
bearing the notice “max. 80 km/h”,
to be placed in a position visible to
the driver (on the instrument panel)
after fixing the tyre;
❒ instruction booklet, explaining the
quick and correct use of the Fix&Go;
❒ a pair of protective gloves.
90
DVDF0S0508c
TYRE REPAIRING
AND PRESSURE
RESTORING
PROCEDURE
33) 31
)
Proceed as follows:
❒ Position the vehicle in a safe and
suitable area and engage the
handbrake. Take the kit. Open the
compressor cover and insert the
sealant cartridge 1 fig. 91 in its
compartment, pressing firmly
downwards.
Remove the adhesive speed label
and apply it in a visible position.
Wear the protective gloves
provided. Remove the valve cap 5
from the punctured tyre and
connect and firmly tighten the
transparent sealing fluid tube 3.