Operation Manual

127
MAIN BEAM
HEADLIGHTS
(POP versions)
To replace the bulb, proceed as
follows:
❒ remove the protecting rubber cap
mentioned above;
❒ press the fastener A fig. 101 and
remove the bulb holder;
❒ remove the snap-fitted bulb and
replace it;
❒ refit the bulb holder locking it
properly;
❒ reinstall the rubber cap.
101
DVDF0S0118c
MAIN BEAM
HEADLIGHTS
(Excluding POP
versions)
To replace the bulb, proceed as
follows:
❒ remove the protecting rubber cap
mentioned above;
❒ disconnect the central electric
connector A fig. 102 and
and release
the bulb holder catch A;
❒ remove the bulb and replace it;
❒ refit the bulb in its seat and
reconnect the connector;
❒ refit the protection cap in its housing
and turn clockwise.
With gas discharge bulbs (Xenon)
(for versions/markets, where provided)
Contact a Fiat Dealership.
102
DVDF0S0197c
MAIN BEAM
HEADLIGHTS
To replace the bulb, proceed as
follows:
❒ remove the protecting rubber cap
mentioned above;
❒ release the two bulb holding clips A
fig. 103;
❒ remove the bulb and replace it;
❒ fit the new bulb, making the outline
of the metallic part coincide with the
grooves on the reflector, then hook
back the bulb holding clips;
❒ reinstall the rubber cap.
103
DVDF0S0119c