Operation Manual

SERVICING AND CARE
152
WINDSCREEN WASHER
NOZZLES
If the jet of fluid is inadequate, firstly
check that there is fluid in the reservoir
(see “Checking levels” in this chapter).
Then check that the nozzle holes are
not clogged; use a needle to unblock
them if necessary.
The windscreen jets are directed by
adjusting the angle.
The jets should be directed at about a
third of the height from the top edge of
the windscreen fig. 134.
IMPORTANT In versions with sunroof,
make sure that the sunroof is closed
before operating the front jets.
134
DVDF0S0131c
REAR WINDOW WASHER
NOZZLE
The rear window washer jets are fixed.
The nozzle holder is located above the
rear window fig. 135.
135
DVDF0S0132c
BODYWORK
ADVICE FOR
PRESERVING THE
BODYWORK
Paint
Paintwork does not only serve an
aesthetic purpose, but also protects the
underlying sheet metal. Normal care for
paintwork consists of washing the car;
how often depends on the conditions
and environment where the car is used.
For example, in highly polluted areas, or
if the roads are spread with salt, it is
advisable to wash the car more
frequently.
IMPORTANT Bird droppings should be
washed off immediately and thoroughly
as the acid they contain is particularly
aggressive.
Versions with matt paintwork
These versions have exclusive matt
paintwork which requires special care
for its preservation.