Operation Manual

KNOWING YOUR CAR
24
It is possible to move along the setup
menu list by pressing the
+ or – buttons once. Operating
modes are different according to the
characteristics of the option selected.
The menu comprises the following
functions:
❒ DIMMER
❒ SPEED BUZZER
❒ TRIP B ACTIVATION/DATA
❒ SET TIME
❒ SET DATE
❒ AUTOCLOSE
❒ UNITS
❒ LANGUAGE
❒ BUZZER VOLUME
❒ BUTTON VOLUME
❒ SEAT BELT BUZZER
❒ SERVICE
❒ AIRBAG/PASSENGER BAG
❒ DAY LIGHTS
❒ ITPMS RESET
❒ RADIO REPETITION
(for markets/versions, where
provided)
❒ SEE PHONE (for markets/versions,
where provided)
❒ SEE NAVIGATION
(for markets/versions, where
provided)
❒ EXIT MENU
TRIP COMPUTER
The Trip computer is used to display
information on car operation when the
key is turned to MAR.
This function includes two separate
trips, namely “Trip A”
and “Trip B”.
Both functions can be reset (reset
means start of a new journey).
“Trip A” may be used to display values
relating to: range (for versions/markets,
where provided), travel distance,
average fuel consumption (for
versions/markets, where provided),
current consumption (for
versions/markets, where provided),
average speed, travel time.
“Trip B” may be used to display the
following values to be displayed: range,
travel distance B, average fuel
consumption B
(for versions/markets, where provided),
average speed B,
travel time B.
SET TIME (SETTING THE
CLOCK)
The time is set through the
multifunction display.
❒ Press the MENU button; the
following two submenus are shown
on the display: “Time” and
“Format”.
❒ Press the + or – button to move
between the two submenus.
❒ Select the required option and
press the MENU button.
❒ When you select the “Clock”
submenu, pressing the MENU
button briefly makes the “hours”
flash on the display.
❒ Press the button + or – to carry out
the adjustment.
❒ Having set the time, briefly press
the MENU button: the
“minutes” will flash on the display.
Set the minutes
using the same procedure as for
the hours.
❒ Having set the time, press and hold
down the MENU button.
–
–
–
–
–