Operation Manual

49
The system indicates a detected
obstacle by displaying an arc
according to the distance of the
obstacle and its position in relation to
the car.
If an objects is detected to the rear
central zone, the display shows an
flashing arc in the corresponding rear
central zone and a sound is emitted.
As the car approaches the object, the
display shows one or more flashing
arcs that approach the car, and the
sound becomes more frequent until it
becomes continuous.
If an objects is detected to the rear left
or right zone, the display shows an
flashing arc in the corresponding rear
left or right zone and a sound is
emitted.
As the car approaches the object, the
display shows one or more flashing
arcs that approach the car, and the
sound becomes more frequent until it
becomes continuous.
The colour on the display depends on
the distance from and position of the
obstacle.
The car is close to the obstacle when a
blinking red arch appears on the
display (to the right, in the centre or to
the left) and a continuous sound is
emitted. If there are several obstacles,
the closest one is indicated.
Fault indications
Any parking sensor faults will be
indicated when reverse is engaged by
the warning light
è (or the icon t on
the colour display) in the instrument
panel and by the relevant message in
the display (for versions/markets,
where provided).
Operation with a trailer
Sensor operation is automatically
deactivated when the trailer’s electrical
cable plug is inserted.
START&STOP
SYSTEM
19)
The Start&Stop device automatically
stops the engine each time the vehicle
is stationary and starts it again when
the driver wants to move off.
In this way, the vehicle efficiency is
increased, by reducing consumption,
dangerous gas emissions and sound
pollution.