Operation Manual

KNOWING YOUR CAR
50
OPERATING MODE
Stopping the engine
With manual gearbox: with the
car stationary, the engine stops with
the gearbox in neutral and the
clutch pedal released.
With Dualogic gearbox: the
engine stops if the vehicle is at a
standstill and the brake pedal is
pressed. This condition can be
maintained even if the brake pedal
is not depressed, if the gear lever is
in position N.
NOTE: The engine can only be
stopped automatically after exceeding
about 10 km/h, to prevent the engine
from being repeatedly stopped when
driving at walking pace.
The warning light
U on the
instrument panel indicates that the
engine has stopped, on some
versions this indication is given by
the display.
Restarting the engine
with manual gearbox: press the
clutch pedal.
With Dualogic gearbox: if the gear
lever is in position N, place it in any
other gear, otherwise release the
brake pedal or move the gear lever
to +, – or R.
MANUAL ACTIVATION
AND DEACTIVATION
The Start&Stop system can be
activated/deactivated using the
button
A - fig. 48 on the dashboard.
When the system is deactivated, the
warning light
or
T symbol switches on.
On some versions the information is
given by the display.
48
DVDF0S0154c
REFUELLING THE
VEHICLE
21) 29)
PETROL AND DIESEL
VERSIONS
fig. 49
Opening tank cap
open the flap A;
turn the ignition key anticlockwise in
the lock and unscrew the cap B;
during refuelling, the cap should be
positioned as illustrated.
49
DVDF0S033c