Operation Manual

KNOWING YOUR CAR
54
switch A pressed rightwards
(identified by symbol K indicates
petrol operation with lighting of the
respective amber LED C;
switch A pressed on the left side
(identified by the symbol G)
indicates LPG operation with
activation of the associated green
LED D.
Five LEDs B (one amber and four
green) on the top part of the switch
display the amount of LPG in the
cylinders.
If the LPG runs out, the system
automatically switches to petrol: the
amber LED C besides the switch
comes on and the green LED D
indicating LPG operation goes off.
55
DVDF0S0189c
After refuelling with LPG, after a normal
start-up on petrol, the fuel system
automatically returns to LPG: the
amber LED C next to the switch goes
off and the green LED D for LPG
operation turns on.
If you specifically wish to run on petrol,
press the switch A on the right-hand
side.
The amber LED C next to the switch
will turn on to indicate that switching
has taken place (the LPG fuel system
has been entirely disabled).
The fuel supply can only be returned to
LPG by operating switch A again,
green LED D next to the switch will turn
on to indicate that switching has taken
place.
In addition, when starting at outside
temperatures below approximately –
10°C, the switching times from petrol
to LPG increase to allow the pressure
regulator/reduction unit to heat up.
IMPORTANT If switching takes place
during acceleration or setting off, there
may be a brief drop in power.
MULTIMEDIA
46)
10)
TIPS, CONTROLS AND
GENERAL
INFORMATION
Road safety
Learn how to use the various system
functions before setting off.
Read the instructions for the system
carefully before setting off.
Reception conditions
Reception conditions change constantly
while driving.
Reception may be interfered with by the
presence of mountains, buildings or
bridges, especially when you are far
away from the broadcaster.
IMPORTANT The volume may be
increased when receiving traffic
bulletins.