Operation Manual

69
Bluetooth® source
Pairing a Bluetooth® audio device
To pair a Bluetooth® audio device,
proceed as follows:
❒ activate the Bluetooth® function
on the device;
❒ press the MEDIA button on the front
panel;
❒ if the “Media” source is active, press
the “Source” button;
❒ select the Bluetooth® Media
source;
❒ press the “Add Device”
button;
❒ search for Uconnect™ on the
Bluetooth® audio device (during
the pairing stage a screen is
displayed showing the progress of
the operation);
❒ when requested by the audio
device, enter the PIN code shown
on the system display or confirm on
the device the PIN displayed;
❒ when the pairing procedure is
completed successfully, a screen is
displayed. Answer “Yes” to the
question to pair the Bluetooth®
audio device as favourite
(the device will have priority over all
other devices to be paired
subsequently). If “No” is selected,
the priority is determined according
to the order of connection. The last
device connected will have the
highest priority;
❒ an audio device can also be paired
by pressing the PHONE button on
the front panel and by selecting
“Settings” or, from the “Settings”
menu,
selecting “Phone/Bluetooth”.
IMPORTANT If the Bluetooth®
connection between mobile phone and
system is lost, consult the mobile
phone handbook.
NOTE The Radio may change the track
being played by modifying the name-
device in the Bluetooth settings of the
phone (where provided), if the device is
connected via USB after the Bluetooth
connection.
Phone mode
Phone mode activation
Press the PHONE button on the front
panel to activate the Phone mode.
Use the buttons on the display to:
❒ dial the phone number (using the
graphic keypad on the display);
❒ display and call the contacts in the
phonebook;
❒ display and call contacts from the
registers of recent calls;
❒ pair up to 10 phones/audio devices
to make access and connection
easier and quicker;
❒ transfer calls from the system to the
mobile phone and vice versa and
deactivate the microphone audio
for private conversations.