Operation Manual

87
display and call the contacts in the
phonebook;
display and call contacts from the
registers of recent calls;
pair up to 10 phones/audio devices
to make access and connection
easier and quicker;
transfer calls from the system to the
mobile phone and vice versa and
deactivate the microphone audio for
private conversations.
The mobile phone audio is transmitted
through the vehicle’s audio system; the
system automatically mutes the radio
when the Phone function is used.
PAIRING A MOBILE PHONE
WARNING Carry out this operation
only with vehicle stationary and in
safety conditions; this function is
deactivated when the vehicle is
moving.
The pairing procedure for a mobile
phone is described below: always
consult the handbook for the mobile
phone in any case.
To pair the mobile phone, proceed as
follows:
activate the Bluetooth® function
on the mobile phone;
press the “Phone” button on the
display;
if no phone is paired with the
system yet, the display shows a
dedicated screen;
select “Yes” to start the pairing
procedure, then search for the
Uconnect™ device on the mobile
phone (if “No” is selected, the
Phone main screen is displayed);
when prompted by the mobile
phone, use its keypad to enter the
PIN code shown on the system
display or confirm on the mobile
phone the PIN displayed;
from the “Phone” screen you can
always pair a mobile phone by
pressing the “Settings” button:
press the “Add Device” button and
proceed as described above;
during the pairing stage a screen is
displayed showing the progress of
the operation;
when the pairing procedure is
completed successfully, a screen is
displayed: answer “Yes” to the
question to pair the mobile phone
as favourite (the mobile phone will
have priority over all other mobile
phones to be paired subsequently).
If no other devices are paired, the
system will consider the first
associated device as favourite.
NOTE After updating the telephone
software, it is advisable for correct
operation to remove the telephone
from the list of devices paired to the
radio, delete the previous pairing of the
system also from the available
Bluetooth® device list on the
telephone and pair it again.