User Manual

MANUAL
TRANSMISSION
To engage the gears, press the clutch ped-
al fully and shift the gear lever into one of
the required positions (the diagram is
shown on the knob).
IMPORTANT The car can only be put in-
to reverse gear when it has stopped mov-
ing completely. With the engine running,
before engaging the reverse, wait at least
2 seconds with the clutch pedal fully down
to prevent damage and grating of the
gears.
To engage reverse (R) from neutral pro-
ceed as follows:
Petrol versions fig. 4
❒ shift the lever to the right and then
back;
Multijet versions fig. 5
❒ lift the sliding ring A under the knob
and shift the lever straight to the left
and then forward.
To release the handbrake:
❒ slightly lift the handbrake and press re-
lease button A;
❒ keep button A pressed and lower the
lever. Warning light x will turn off.
Press the brake pedal when carrying out
this operation to prevent the car from
moving accidentally.
132
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
fig. 4
FF0L0146m
fig. 5
F0L0200m
127-144 Croma TRW GB 28-09-2007 11:21 Pagina 132