User Manual

13
SAFETY
DEVICES
CORRECT USE
OF THE CAR
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
DASHBOARD
AND CONTROLS
EMERGENCY CLOSING
fig. 11
To lock the doors if the remote control
does not work properly, proceed as fol-
lows:
❒ fit the metal insert into the slot C set
on the doors and turn it in the direc-
tion of the arrow (as shown in the fig-
ure).
IMPORTANT Before carrying out the
emergency door locking, check whether
the independent boot locking function on
the multifunction display set-up menu is
off (see paragraph “Multifunction display”).
EMERGENCY OPENING USING
THE METAL INSERT
If the remote control does not work
properly (e.g.: battery flat), it is however
possible to use the emergency metal in-
sert set inside the remote control.
The metal insert operates the driver’s side
lock (the pawl is located under the out-
door handle fig. 9).
To use the metal insert set inside the re-
mote control, proceed as follows fig. 10:
❒ move aside lever A and take out the
emergency metal insert B, at the same
time.
fig. 9
F0L0103m
fig. 10
F0L0102m
fig. 11
F0L0205m
The metal insert acts on the interested
door.
For emergency opening proceed as fol-
lows:
❒ raise the handle, fit the metal insert in-
to the revolving plug and turn it coun-
terclockwise;
❒ remove the key and lower the handle;
❒ raise the handle and open the door.
001-038 Croma TRW GB 28-09-2007 14:06 Pagina 13