User Manual

173
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATION
S
INDEX
DASHBOARD
AND
CONTROLS
SAFETY
DEVICES
CORRECT USE
OF THE CAR
IN AN
EMERGENCY
IF AN EXTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
“When needing to change a bulb”.
FRONT LIGHT UNITS fig. 22
The front light units contain the side/tail-
lights, dipped beam, main beam and di-
rection indicator bulbs.
The bulbs are arranged inside the light unit
as follows:
A Sidelights / main beam headlights;
B Dipped beam headlights;
C Direction indicators.
DIPPED BEAM HEADLIGHTS
Gas-filled filament lamps
To change the bulb, proceed as follows:
❒ remove the protective cover B-fig. 22;
❒ release the bulb holder catch A-fig. 23;
❒ disconnect the electric connector B;
❒ remove the bulb C and replace it;
❒ fit the new bulb, making the tabs of the
metallic part coincide with the grooves
on the reflector, reconnect the electri-
cal connector B then hook the bulb
holder catch A;
❒ refit the protective cover A-fig. 22
correctly.
Gas-discharge lamps (Bi-Xenon)
(where provided)
Due to high voltage, the bulb
of (Bi-Xenon) gas-discharge
headlights must only be replaced by
experts: danger of death! Contact Fi-
at Dealership.
WARNING
fig. 22
F0L0399m
fig. 23
F0L0402m
157-192 Croma TRW GB 28-09-2007 14:14 Pagina 173