Owners Manual

111
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
INDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
DIRECTION INDICATORS
Front
To change the bulb, proceed as follows:
❒ remove the protecting rubber cap men-
tioned above;
❒ turn the bulb holder clockwise A-fig.
22 and withdraw it;
❒ remove the snap-fitted bulb and replace
it;
❒ refit the bulb holder A by turning it
clockwise and locking it properly;
❒ reinstall the rubber cap;
IF AN EXTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
“When needing to change a bulb”.
FRONT LIGHT CLUSTERS
The front light clusters contain sidelights,
dipped beam, main beam and direction in-
dicator bulbs.
Operating from the engine compartment
remove the rubber cap A-fig. 20 to ac-
cess the direction indicators; remove the
rubber cap B-fig. 20 to access the bulbs
of the dipped beam headlights.
To access the bulbs of the sidelights/day-
lights and of the main beams, after fully
steering the wheels open the guard door
C-fig. 21 on the wheelhouse at the level
of the lights, then remove the rubber cap
D-fig. 21.
fig. 20
F0S093Ab
fig. 21
F0S094Ab
fig. 22
F0S095Ab
095-122 ABARTH 500 GB 28-01-2010 12:06 Pagina 111