Owners Manual

112
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
IINDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
MAIN BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ remove the protecting rubber cap men-
tioned above;
❒ release the two bulb holding clips A-
fig. 25;
❒ remove the bulb and replace it;
❒ fit the new bulb, making the outline of
the metallic part coincide with the
grooves on the reflector, then hook
back the bulb holding clips;
❒ reinstall the rubber cap;
DIPPED BEAM HEADLIGHTS
To change the bulb, proceed as follows:
❒ remove the protecting rubber cap men-
tioned above;
❒ press the fastener A-fig. 24 and extract
the bulb holder;
❒ remove the snap-fitted bulb and replace
it;
❒ refit the cap locking it properly.
❒ reinstall the rubber cap;
Side
To change the bulb, proceed as follows:
❒ prise in the point indicated by the ar-
row, so as to compress the fixing clip
and extract the assembly B-fig. 23;
❒ turn the bulb holder counterclockwise,
remove the snap-fitted bulb and replace
it;
❒ reinstall the bulb holder into the lens,
then install the assembly B making sure
that the fixing clip has clicked.
fig. 24
F0S097Ab
fig. 25
F0S098Ab
fig. 23
F0S096Ab
Due to high voltage, the bulb
of (Xenon) gas-discharge
headlights must only be replaced by
experts: danger of death! Contact
Abarth Dealership.
WARNING
095-122 ABARTH 500 GB 28-01-2010 12:06 Pagina 112