Owners Manual

114
WARNING
LIGHTS AND
MESSAGES
CAR
MAINTENANCE
TECHNICAL
SPECIFICATIONS
IINDEX
YOUR CAR
SAFETY
DEVICES
CORRECT USE
OF THE
CAR
IN AN
EMERGENCY
IF AN INTERIOR LIGHT
BURNS OUT
For the type of bulb and power rating, see
“When needing to change a bulb”.
INSIDE CEILING LIGHT
To change the bulb, proceed as follows:
❒ using the screwdriver provided, extract
the ceiling light A-fig. 32 working in the
point indicated by the arrow;
NUMBER PLATE LIGHTS fig. 31
To replace the bulbs proceed as follows:
❒ work in the point shown by the arrow
and remove lens A;
❒ change the bulb releasing it from the
side contacts and making sure the new
bulb is correctly fastened between the
contacts;
❒ reinstall the lens.
THIRD BRAKE LIGHT fig. 29-30
To change the bulb proceed as follows:
❒ remove the two guard caps and un-
screw the two fastening screws A;
❒ withdraw the assembly;
❒ disconnect the electric connector B;
❒ press the retaining device C and open
the bulb holder;
❒ remove the snap-fitted bulb to be re-
placed and replace it;
❒ close back the cap locking it properly.
❒ screw in the two fastening screws and
reinstall the guard caps;
fig. 30
F0S103Ab
fig. 29
F0S102Ab
fig. 31
F0S104Ab
095-122 ABARTH 500 GB 28-01-2010 12:06 Pagina 114