Owner manual

153
SAFETY
STARTING
AND DRIVING
WARNING
LIGHTS AND
MESSAGES
SERVICE
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
CONTROLS
AND DEVICES
IN AN
EMERGENCY
THIRD BRAKE LIGHT fig. 26-27
To change the bulb proceed as follows:
open the boot;
remove the rubber caps A-fig. 26;
press the catches B-fig. 26 and remove
the lens unit C-fig. 27;
disconnect the electric connector;
press in the tabs D-fig. 27 and remove
the bulb holder;
remove the snap-fitted bulb and replace
it.
NUMBER PLATE LIGHTS
fig. 28-29
To change the bulb proceed as follows:
manipulate the point shown by the ar-
row and remove the lens unit A-fig. 28;
change the bulb fig. 29 by releasing
it from the side contacts and making
sure the new bulb is correctly fastened
between these contacts;
reattach the snap-fitted lens unit.
fig. 26
F0M0210m
fig. 27
F0M0211m
fig. 28
F0M0212m
fig. 29
F0M0233m
135-166 ACTUAL 1ed EN 26-07-2010 16:00 Pagina 153